| Double Floss Holder is a supplementary oral care tool for flossing.
A new thread of dental floss can be reattached every time after use. |
| |
|
 |
| |
| The most common Dental Double
Floss Holder is regular V-shaped, slingshot,
forked pronged type. It has two fixed points and two easy-to-use tie-off
cleats that hold floss tighter. The dental floss strung
taut between the struts. |
| |
|
Indications and Key Benefits |
| |
| Allows greater flossing control and effectively clean adjacent
surfaces of teeth: |
| |
- Helps all ages floss better
and easier
|
- Great for people who prefer to floss with one hand
and who wish to advance floss after each tooth
|
- Who has difficulty with conventional dental floss technique
|
- Ease of access to back teeth areas
|
- Fitting for parents or caregivers in helping children
|
- Suitable for individuals with special needs
|
| In combination with
FLUORIDE MINT WAXED DENTAL FLOSS
and Bass Method it is ESSENTIAL
for: |
| |
|
|
|
|
|
|
Also USEFUL for:
|
|
|
|
|
| |
|
Product Description and Features |
| |
| HANDLE: |
- Easy to grasp and curved - Has no sharp corners or projections - Light
weight plastic, consistent with strength - Thumb rests assist in
flossing - Has two easy-to-use tie-off cleats - Fits also for
two-handed flossing - Long and wide for better positioning - The
handle end may be used as a finger extender
|
| PRONGS: |
- Medium, narrow, and flexible -
Fits into toothbrush holders! - Makes available for
flossing mal-positioned teeth and distal surfaces
|
| COLORS: |
- Individually wrapped in
assorted translucent jewel-tone colors
|
| DIMENSIONS: |
- L5 3/4" x W1 1/4" x H 1/2"
|
| SHIPPING WEIGHT: |
|
|
| MANUFACTURED: |
- PRACTIvalu Corporation. Made in
Taiwan
|
| DISTRIBUTED: |
- Exclusively to the Dental Offices
|
| |
| Buy Now DOUBLE FLOSS HOLDER for $2.50 and you'll get durable,
flexible, inexpensive, easy-to-use on the USA market. |
| |
|
Direction for Use |
| |
| Flossing with this tool is easy applying the proper technique. |
| |
- Round floss 1-2
times around left side cleat with a slot - move floss to the
opposite right prong's slot on the outside surface - move floss to the
opposite left prong's slot - move floss on the outside surface to
the opposite right side cleat slot - taut floss between the
two prongs - round floss 1-2 times around right side cleat with a
slot. Slot on the bottom of the floss holder may be used as a finger
extension and take-up spool.
|
| The
dental floss on the floss holder must be taut between the two
prongs. |
| |
| Hold the floss over the teeth contact for insertion. |
| |
| The
dental floss is lowered gently and drawn through the contact
area. |
| |
| The double floss holder should be pulled tightly against one of the
adjacent tooth surfaces. |
| |
| Start from the bottom of the gum margin. |
| |
| Smoothly slide the floss up and down to clean the adjacent tooth
surface. |
| |
| Pull the floss tightly against the other adjacent tooth surface. |
| |
| Gently slide the floss up and down to clean the other adjacent tooth
surface. |
| |
|
Tips and Advice
|
| |
| Should be replaced every 3 months as with toothbrushes. |
| |
| Should be replaced immediately after common cold, sore throat,
fever, yeast infection, etc. |
| |
| The taut floss can cut the gum in the front and back of the tooth: |
- use a rest or fulcrum to prevent snapping through the teeth
contact
|
- move the floss holder left and right and slowly slide between
the teeth
|
| |
|
Contact Dentist |
| |
Looking forward to hearing from you
Aleksandr V. Melekhin, DDS |
| |
|
Return from Double Floss Holder to Dental Floss |
